background image

2

Safety and Maintenance Guidelines

Important Safety Information

For safety and regulatory information, refer to the 

Product Notices provided on your media disc, if one

is included, or in your documentation kit. To locate updates to the user guide for your product, go to

http://www.hp.com/support

, and select your country. Select Drivers & Downloads, and then follow the

on-screen instructions
A USB cable for power and data is included with the monitor. Use only the supplied cable when

connecting the monitor to a computer.

WARNING!

To reduce the risk of serious injury, read the 

Safety and Comfort Guide. It describes

proper workstation, setup, posture, and health and work habits for computer users, and provides

important electrical and mechanical safety information. This guide is located on the Web at

http://www.hp.com/ergo

 and/or on the documentation disc, if one is included with the monitor.

WARNING!

LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks,

speakers, chests, or carts may fall over and cause personal injury.
Care should be taken to route the USB cable connected to the LCD monitor so that it can not be

pulled, grabbed, or tripped over.

CAUTION:

 For the protection of the monitor, as well as the computer, connect the computer power

cord to some form of surge protection device such as a power strip or Uninterruptible Power Supply

(UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as

having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so

you can replace the equipment, if surge protection fails.
Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor.

CAUTION:

Do not pick up the monitor by its protective case. The case and monitor are attached

together by magnets. If held improperly, the monitor could detach from the case and fall.

Maintenance Guidelines

To enhance the performance and extend the life of the monitor:

Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those

controls that are covered in the operating instructions. If the monitor is not operating properly or

has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.

Use only a power source and connection appropriate for this monitor, as indicated on the label/

back plate of the monitor.

Turn the monitor off when not in use. You can substantially increase the life expectancy of the

monitor by using a screen saver program and turning off the monitor when not in use.

NOTE:

Monitors with a “burned-in image” are not covered under the HP warranty.

Slots and openings in the cabinet are provided for ventilation. These openings must not be

blocked or covered. Never push objects of any kind into cabinet slots or other openings.

Do not drop the monitor or place it on an unstable surface.

2

Chapter 2   Safety and Maintenance Guidelines

Содержание EliteDisplay S140u





















Отзывы: