b.
Remove the three Phillips broadhead M2.0 × 2.0 screws (1) from each hinge.
c.
Remove the hinges from the display (2).
The display hinges are available as spare part number N08130-001.
8.
If you need to remove the display panel:
a.
The display panel is secured to the display enclosure with tape that is installed under the left and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape (1). While
turning the tweezers, wrap the tape around the tweezers (2) as you continue to pull the tape out
from behind the display panel (3). You must pull the tape multiple times before it is completely
removed.
b.
Rotate the display panel over and place it next to the display enclosure (4).
Display panels are available as the following spare part numbers:
N14760-001: Widescreen ultra extended graphics array (WUXGA), BLNB, 400 nits
N14761-001: WUXGA, 250 nits
N14762-001: WUXGA, 250 nits Touch-on Panel (TOP)
N14763-001: WUXGA, 1000 nits, privacy panel
66
Chapter 6 Removal and replacement procedures for authorized service provider parts