3.
Remove the board from the computer (4).
Reverse this procedure to install the fingerprint reader board.
Power connector cable
To remove the power connector cable, use this procedure and illustration.
Table 6-8
Power connector cable description and part number
Description
Spare part number
Power connector cable
N08540-001
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 40
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the power connector cable:
1.
Disconnect the cable from the system board (1).
2.
Remove the Phillips M2.0 × 5.0 screw (2) that secures the power connector cable to the computer.
56
Chapter 6 Removal and replacement procedures for authorized service provider parts