5.
Remove the USB board from the computer (6).
Reverse this procedure to install the USB board.
Fingerprint reader board
To remove the fingerprint reader board, use this procedure and illustration.
Table 6-7
Fingerprint reader board description and part number
Description
Spare part number
Fingerprint reader board
N02325-001
Fingerprint reader board cable (included in cable kit)
N08556-001 (FPC)
N08557-001 (FFC)
Before removing the fingerprint reader board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 40
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the fingerprint reader board:
1.
Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket to the computer.
2.
Disconnect the cable from the ZIF connector on the fingerprint reader board (2), and then remove the
bracket from the computer (3).
Fingerprint reader board
55