HP EliteBook 8560p, Руководство по техническому обслуживанию и ремонту

Страница: 79 / 164

Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket and screws.
Description Spare part number
750-GB, 7200-rpm hard drive 633252-001
500-GB, 7200-rpm hard drive, for use in either the hard drive bay or the upgrade drive bay 634919-001
320-GB, 7200-rpm hard drive 641672-001
320-GB, 7200-rpm hard drive (Self-Encrypting Drive (SED)) 626978-001
250-GB, 7200-rpm hard drive 635225-001
160-GB solid-state drive 649652-001
128-GB solid-state drive 649651-001
Hard Drive Hardware Kit (includes hard drive bracket and screws) 644694-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 60 ).
5. Remove the bottom door (see Bottom door on page 66 ).
Remove the hard drive:
1. Position the computer upside-down, with the battery bay toward you.
2. Loosen the three captive Phillips screws (1) that secure the hard drive to the computer.
3. Grasp the Mylar tab on the hard drive and slide the hard drive to the right (2) to disconnect it
from the system board connector.
Component replacement procedures
71