HP EliteBook 745 G2 Скачать руководство пользователя страница 75

Страница: 75 / 172

Removal and replacement procedures for

Authorized Service Provider parts

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider.

Accessing these parts can damage the computer or void the warranty.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service label at the bottom of your computer. See

Service Label on page 20

for details.

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

There are as many as 61 screws that must be removed, replaced, and/or loosened when servicing

the Authorized Service Provider parts. Make special note of each screw size and location during removal and

replacement.

Display panel (non-touch)

NOTE:

Non-touch displays are spared at the subcomponent level only. Touch displays are only spared as a

whole (touch display components are not spared).

In non-touch models, you can remove the raw display panel with the display assembly still connected to the

computer. The following section shows how to remove the raw display panel without removing the display

assembly from the computer.

See

Display assembly on page 92

later in this chapter to remove internal components that require that you

remove the display assembly.

Description

Spare part number

Display bezel

Display bezel for use in HP EliteBook 745 models

768808-001

Display bezel for use in HP EliteBook 755 models

773963-001

Display panel

(35.6 cm)

14.0 in LED, HD, AntiGlare (AG), SVA (1366×768), 200 nits (cd/m

), flat

768809-001

ENWW

Component replacement procedures

Содержание EliteBook 745 G2













































































































































































Результаты поиска

Содержание EliteBook 745 G2

Отзывы:

HP EliteBook 745 G2, Руководство по техническому обслуживанию и ремонту, Страница: 75 / 172

Результаты поиска

Содержание EliteBook 745 G2

Отзывы: