HP EliteBook 745 G2 Скачать руководство пользователя страница 5

Страница: 5 / 172

Safety warning notice

WARNING!

To reduce the possibility of heat-related injuries or of overheating the device, do not place the

device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not

allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or

clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as

pillows or rugs or clothing, during operation. The device and the AC adapter comply with the user-accessible

surface temperature limits defined by the International Standard for Safety of Information Technology

Equipment (IEC 60950).

ENWW

Содержание EliteBook 745 G2













































































































































































Результаты поиска

Содержание EliteBook 745 G2

Отзывы:

HP EliteBook 745 G2, Руководство по техническому обслуживанию и ремонту, Страница: 5 / 172

Результаты поиска

Содержание EliteBook 745 G2

Отзывы: