HP EliteBook 745 G2 Скачать руководство пользователя страница 28

Страница: 28 / 172

Right

Component

Description

(1)

Audio-out (headphone) jack/Audio-in

(microphone) jack

Produces sound when connected to optional powered stereo

speakers, headphones, earbuds, a headset, or television audio.

Also connects an optional headset microphone.

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.

For additional safety information, see the

Regulatory, Safety,

and Environmental Notices

NOTE:

When a device is connected to the jack, the computer

speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and

audio-in (microphone).

(2)

DisplayPort

Connects an optional digital display device, such as a high-

performance monitor or projector.

(3)

Memory card reader

Reads data from and writes data to memory cards such as

Secure Digital (SD).

(4)

USB 3.0 ports (2)

Connect optional USB 3.0 devices and provide enhanced USB

power performance.

(5)

RJ-45 (network) jack

Connects a network cable.

(6)

Docking connector

Connects an optional docking device.

(7)

Power connector

Connects an AC adapter.

Chapter 2 External component identification

ENWW

Содержание EliteBook 745 G2













































































































































































Результаты поиска

Содержание EliteBook 745 G2

Отзывы:

HP EliteBook 745 G2, Руководство по техническому обслуживанию и ремонту, Страница: 28 / 172

Результаты поиска

Содержание EliteBook 745 G2

Отзывы: