HP EliteBook 745 G2 Скачать руководство пользователя страница 122

Страница: 122 / 172

Select

Start

Computer

Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the

update.

Double-click the file that has an .exe extension (for example,

filename

.exe).

The BIOS installation begins.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded file

from your hard drive.

Using MultiBoot

About the boot device order

As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility, which is

enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include

optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices. Boot devices

contain bootable media or files that the computer needs to start and operate properly.

NOTE:

Some boot devices must be enabled in Computer Setup before they can be included in the boot

order.

You can change the order in which the computer searches for a boot device by changing the boot order in

Computer Setup. You can also press

esc

while the “Press the ESC key for Startup Menu” message is displayed

at the bottom of the screen, and then press

. Pressing

displays a menu that shows the current boot

devices and allows you to select a boot device. Or, you can use MultiBoot Express to set the computer to

prompt you for a boot location each time the computer turns on or restarts.

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:

●

To set a new boot order that the computer uses each time it is turned on, by changing the boot order in

Computer Setup.

●

To dynamically choose the boot device, by pressing

esc

while the “Press the ESC key for Startup Menu”

message is displayed at the bottom of the screen, and then pressing

to enter the Boot Device Options

menu.

●

To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device each

time the computer is turned on or restarted.

Setting a new boot order in Computer Setup

To start Computer Setup and set a boot device order that the computer uses each time it is turned on or

restarted, follow these steps:

110 Chapter 8 Computer Setup (BIOS) and HP PC Hardware Diagnostics (UEFI) in Windows 7

ENWW

Содержание EliteBook 745 G2













































































































































































Результаты поиска

Содержание EliteBook 745 G2

Отзывы:

HP EliteBook 745 G2, Руководство по техническому обслуживанию и ремонту, Страница: 122 / 172

Результаты поиска

Содержание EliteBook 745 G2

Отзывы: