HP E3494A, Инструкция по установке и обслуживанию

Страница: 47 / 108

General Configuration Items
The general configuration items must be set correctly for each target
system.
To set restrict to real-time runs
cf rrt=yes
When the processor is running user code, no operations that require stopping
the processor like reading memory or modifying registers will be performed,
an error will be issued instead. The processor must be explicitly stopped
before these commands can be performed.
cf rrt=no
When running user code, the probe will automatically stop the processor,
perform a command and restore the processor to running when commands
that need the processor stopped are requested.
For most debuggers, changing this setting has no effect since most debuggers
require you to stop the processor to perform any action like reading memory
or changing registers. If your debugger allows displaying or modifying
memory or registers while the processor is running, you must set rrt=off in
order to use this feature.
Default: cf rrt=yes
Configuring the HP Processor Probe for PowerPC 603/603e
General Configuration Items
39