HP E2466C, Руководство пользователя

Страница: 6 / 93

Contents
1 Setting Up the Preprocessor Interface
Before You Begin 1–3
Setting Up the Preprocessor Interface Hardware 1–5
To select the operating mode 1–5
To disassemble the S.E.C. cartridge 1–7
To connect to the target system 1–9
To connect to the HP 16550A two-card analyzer 1–13
To connect to the HP 16554/55/56 analyzers 1–14
To power up or power down 1–15
To protect the preprocessor interface when not in use 1–15
Setting Up the Preprocessor Interface Software 1–16
To copy the HP 16500B/C logic analyzer files 1–17
To load the HP 16505A Prototype Analyzer files 1–18
To set up the preprocessor interface for timing 1–19
To connect to the APIC and JTAG signals 1–20
2 Analyzing the Intel Pentium II Processor
Displaying Information 2–3
To set up the HP 16505A workspace 2–3
To display the format specification 2–3
To display the configuration symbols 2–4
To display captured state information 2–8
To display captured timing data 2–9
Using the Transaction Tracker 2–10
Transaction Tracker Messages 2–12
Errors and warnings 2–12
Reaching boundaries 2–12
Protocol Violations 2–13
Preprocessor Interface for the Pentium II Processor v