HP E2466C, Руководство пользователя

Страница: 28 / 93

To set up the preprocessor interface for timing
The same format specification loaded for state analysis is also used for timing
analysis. To configure the logic analyzer for timing analysis:
1
Configure the HP E2466C for timing analysis by setting the MODE
switch to the "Up" position. Only the Red LED should be lit.
2
Select the "Pentium II" icon on the HP 16505A, and open the Config
menu of the logic analyzer.
3
Select the Type field for the analyzer and select Timing.
The following figure shows the HP 16505A Config Menu display for the
HP 16550A logic analyzer:
Configuration Menu with Timing Mode
Figure 9
Setting Up the Preprocessor Interface Software
To set up the preprocessor interface for timing
Preprocessor Interface for the Pentium II Processor 1-19