CLI commands
Virtual AP context
2-109
no html authentication radius profile
Do not validate HTML logins using the specified RADIUS profile.
html authentication request radius cui
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
html authentication request radius cui
Include a request for a CUI in the authentication request.
no html authentication request radius cui
Do not include a request for a CUI in the authentication request.
html authentication timeout
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
html authentication timeout
<number>
Sets the HTML authentication timeout.
active
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
active
Enable this VAP (VSC).
no active
Disable this VAP (VSC).
band steering
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
band steering
Enable band steering on this VSC between both radios.
no band steering
Disable band steering on this VSC between both radios.
beacon dtim count
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
beacon dtim count
<number>
Defines the DTIM period in the beacon.
Client stations use the DTIM to wake up from low-power mode to receive multicast traffic. The
controller transmits a beacon every 100 ms. The DTIM counts down with each beacon that is sent,
therefore if the DTIM is set to 5, then client stations in low-power mode will wake up every 500 ms
(.5 second) to receive multicast traffic.
Содержание E-MSM720
