CLI commands
Interface context
2-118
Interface context
Path:
View > Enable > Config > Interface
Use this context to configure an physical interface (port).
New
duplex-mode
Supported on: E-MSM720
duplex-mode (auto | half | full)
Sets the duplex mode for the current port.
New
end
Supported on: E-MSM720
end
Switches to parent context.
New
flow-control
Supported on: E-MSM720
flow-control
Enables flow control on the current port.
no flow-control
Disables flow control on the current port.
New
flow-control auto-negotiation
Supported on: E-MSM720
flow-control auto-negotiation
Enables flow control auto negotiation on the current port.
no flow-control auto-negotiation
Disables flow control auto negotiation on the current port.
New
speed
Supported on: E-MSM720
speed (auto | 10 | 100 | 1000 | 10-100)
Sets the speed for the current port.
New
trunk group
Supported on: E-MSM720
trunk group
<group>
Sets the trunk group number when "trunk type" is set to "trunk".
Содержание E-MSM720
