CLI commands
Virtual AP context
2-105
Description
The controller features an intelligent bridge which can apply security filters to safeguard the flow
of wireless traffic. The filters limit both incoming and outgoing traffic as defined below, and force
the controller to exchange traffic with a specific upstream device. If the controller is configured to
use the services of a HP access controller, then the default security filters are automatically
enabled and all traffic is sent to the access controller.
Default filters for incoming wireless traffic
Applies to traffic sent from wireless client stations to the controller.
Accepted
Any IP traffic addressed to the access controller.
PPPoE traffic (The PPPoe server must be the upstream device.)
IP broadcast packets, except NetBIOS
Certain address management protocols (ARP, DHCP) regardless of their source address.
Any traffic addressed to the controller, including 802.1X.
Blocked
All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination
address. TTPS traffic not addressed to the controller (or upstream device) is also blocked,
which means wireless client stations cannot access the management tool on other HP
products.
Default filters for outgoing wireless traffic
Applies to traffic sent from the controller to wireless client stations.
Accepted
Any IP traffic coming from the upstream device, except NetBIOS packets.
PPPoE traffic from the upstream device.
IP broadcast packets, except NetBIOS
ARP and DHCP Offer and ACK packets.
Any traffic coming from the controller itself, including 802.1X.
Blocked
All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination
address.
mac-filters local
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
mac-filters local
Enables the MAC filter list.
no mac-filters local
Disables the MAC filter list.
Содержание E-MSM720
