CLI commands
WAN IP interface context
2-94
static
This option enables you to manually assign an IP address to the controller.
none
No IP address.
ip address
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ip address
<ip address>
/
<mask>
Sets a static IP address for the port.
Parameters
<address>
IP address.
</mask>
Subnet mask in CIDR format. Specifies the number of bits in the mask.
ip nat
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ip nat
Enables Network Address Translation.
no ip nat
Disables Network Address Translation.
nat limit port range
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
nat limit port range
Reserves a range of TCP and UDP ports for each user starting at port 5000.
no nat limit port range
Use any port for NAT.
All outgoing traffic for the user is mapped within the range. Applications that set an incoming port
(Active FTP, for example) may choose a port that is outside of the allocated port range. If you
enable this feature you should not assign static NAT mappings in the range 5000 to 32768.
nat limit port range size
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
nat limit port range size
<number>
Determine the size of the range to use per user, this will limit the number of user authentication
supported if too high.
ip address dhcp client-id
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ip address dhcp client-id
<id>
Specifies an ID to identify the controller to a DHCP server. This parameter is not required by all
ISPs.
no ip address dhcp client-id
Deletes the specified DHCP client id.
Содержание E-MSM720
