Server Installation
Inserting the Server into the Rack
CAUTION:
To avoid destabilizing the rack, install multiple servers starting from the
bottom of the rack.
To insert the server into the rack:
1.
Align the rear end of the fixed server rails (1), on the sides of the server, with the
front end of the fixed rack rails (2).
Figure 4-6: Aligning the rear end of the fixed server rails
with the front end of the fixed rack rails
WARNING: To avoid personal injury, press the rail release latches and slowly
slide the server into the rack. The rail release latches can pinch your fingertips.
2.
Insert the server fully into the rack, ensuring that the fixed server rails slide
inside the fixed rack rails.
CAUTION:
Keep the server parallel to the floor when sliding the fixed server rails
into the slide rails. Tilting the server can damage the rails.
3.
Tighten the thumbscrews on the front panel to secure the server to the rack.
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
4-7
HP CONFIDENTIAL
Writer: Anna Roberts File Name: e-ch4 Server Installation.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:17 AM
