Installing Hardware Options
4.
Install the CD-ROM/diskette or DVD-ROM/diskette drive assembly in the empty
bay.
Figure 3-14: Installing a CD-ROM/diskette or
DVD-ROM/diskette drive assembly
5.
Keep the shipping ejector key. The shipping/ejector key can be retained in the
ejector key port on the front of the server or reinstalled in its storage location
inside the chassis.
The CD-ROM/diskette or DVD-ROM/diskette drive assembly can be removed for
use in another ProLiant DL320 Generation 2 server or to prevent unwanted software
installation.
Installing Hard Drives
Optional mass storage devices can be connected to the server through the optional
SCSI module or an array controller expansion board.
Installing ATA Hard Drives
This server model comes pre-configured for two 1-inch ATA hard drives and has two
ATA channels.
3-18
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Installing Hardware Options.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:16 AM