HP D5970A - NetServer - LCII, Руководство по установке

Страница: 101 / 203

Chapter 8 Rack Mounting the HP NetServer
93
If your HP NetServer is still in its box, the template should be in the
accessories tray that sits on top of the HP NetServer itself.
2. Hold the template alongside the outside face (the front) of one of the front
rack columns.
3. Line up the bottom of the template with the lower line of the HP
NetServer’s location in the rack.
The template covers a span of 7 EIA units, the height required by the HP
NetServer.
4. Slide the rack nuts onto the column where indicated on the template.
See Figure 8-2.
If you don’t have the template, Figure 8-3 shows rack nut placement for the
front columns.
Figure 8-2. Placing Rack Nuts on Rack Columns
Bottom of
Server
Fourth Hole
From Bottom
Sixth Hole
From Bottom
Ninth Hole
From Bottom
Seventeenth
Hole From
Bottom
Attach nuts to this face
of the left-front and
right-front columns
Right Left
#
#
#
#
#
"
#" represents
the EIA unit
numbers on the
rack columns
Front of
Rack
#
Figure 8-3. Rack Nut Locations on the Rack’s Front Columns