HP COMPAQ PRESARIO G42 Скачать руководство пользователя страница 96

Страница: 96 / 143

Remove the fan/heat assembly (fan/heat sink appearance may vary):

Turn the system board upside down.

Disconnect the fan cable

(1)

from the system board.

Follow the sequence embossed on heat sink to loosen the four Phillips PM2.5×7.0 captive screws

(2)

that secure the fan/heat sink assembly to the system board.

NOTE:

Due to the adhesive quality of the thermal material located between the fan/heat sink

assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach the assembly.

Remove the fan/heat sink assembly

(3)

The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly

(1)

(3)

and the processor

(2)

and video components

(4)

each time the fan/heat sink assembly is removed.

Thermal pads and thermal paste must be installed on all surfaces before the fan/heat sink assembly is
reinstalled.

NOTE:

Thermal pads and thermal paste are included with all fan/heat sink assembly, system board,

and processor spare part kits.

The following illustration shows the locations for thermal material on systems with discrete graphics
subsystems.

Chapter 4 Removal and replacement procedures

Содержание COMPAQ PRESARIO G42
















































































































































Результаты поиска

Содержание COMPAQ PRESARIO G42

Отзывы:

Похожие инструкции для COMPAQ PRESARIO G42

Бренды по названию

Популярные бренды

HP COMPAQ PRESARIO G42, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание COMPAQ PRESARIO G42

Отзывы:

Похожие инструкции для COMPAQ PRESARIO G42

Бренды по названию

Популярные бренды