Battery
Description
Spare part number
6-cell 55-WH (2.55Ah) LI-ion
593554-001
6-cell 47-WH (2.2-Ah) LI-ion
593553-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface.
2.
Slide the battery release latch
(1)
to release the battery.
3.
Pivot the battery
(2)
upward and lift it out of the computer
(3)
.
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge
downward until the battery is seated. The battery release latch automatically locks the battery into
place.
Component replacement procedures
45
Содержание COMPAQ PRESARIO G42
