EL-MF877-00 Page 3
Template Revision A
d. Cut the plastic tie that secures the wires to the cover (see Figure 12).
e. Remove the top cover from the power supply by sliding it toward the back of the power supply to disengage the clips
that secure the cover to the power supply.
f. Remove the side cover by rotating the cover to disengage the tabs that secure the side cover into the power supply
chassis, and then sliding the cover toward the front of the power supply.
g. Cut the wires from the PCA.
h. Remove the three screws that secure the PCA to the power supply chassis (see Figure 13).
i. Remove the power supply PCA from the power supply.
j. Cut the five capacitors as shown in Figure 14.
POWER SUPPLY 2
a. Remove one screw from the back the power supply (see Figure 15).
b. Remove the three screws from the top of the power supply (see Figure 16).
c. Remove the one screw from the front of the power supply (see Figure 16).
d. Cut the plastic tie that secures the wires to the cover (see Figure 16).
e. Remove the top cover from the power supply by sliding it toward the back of the power supply to disengage the clips
that secure the cover to the power supply.
f. Remove the side cover by rotating the cover to disengage the tabs that secure the side cover into the power supply
chassis, and then sliding the cover toward the front of the power supply.
g. Cut the wires from the PCA.
h. Remove the three screws that secure the PCA to the power supply chassis (see Figure 17).
i. Remove the power supply PCA from the power supply.
j. Cut the small PCA from the large power supply PCA (see Figure 18).
k. Cut the two capacitors as shown in Figure 18.
POWER SUPPLY 3
a. Remove six screws from the top the power supply (see Figure 19).
b. Remove the one screw from the front of the power supply (see Figure 19).
c. Remove the two screws from the back of the power supply (see Figure 20).
d. Cut the plastic tie that secures the wires to the cover (see Figure 20).
e. Remove the top cover from the power supply by sliding it toward the back of the power supply to disengage the clips
that secure the cover to the power supply.
f. Remove the side cover by rotating the cover to disengage the tabs that secure the side cover into the power supply
chassis, and then sliding the cover toward the front of the power supply.
g. Cut the wires from the PCA.
h. Remove the four screws that secure the PCA to the power supply chassis (see Figure 21).
i. Remove the PCA from the power supply.
j. Cut the seven capacitors as shown in Figure 22.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
