Connector board cables
To remove the connector board cables, use this procedure and illustration.
NOTE:
The connector board cables are included in the Cable Kit, spare part number L14906-001, and include
double-sided adhesive.
Before removing the connector board cables, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 29
2.
Remove the top cover/keyboard (see
).
3.
Disconnect the battery cable from the system board (see
Remove the connector board cables:
1.
Release the two ZIF connectors (1) to which the USB port board cables are connected, and then disconnect
the USB port board cables from the system board.
2.
Release the two ZIF connectors (2) to which the USB port board cables are connected, and then disconnect
the USB port board cables from the USB port board.
3.
Detach the USB port board cables (3) from the bottom cover. (The USB port board cables are attached to
the bottom cover with double-sided adhesive.)
4.
Remove the USB port board cable (4).
Reverse this procedure to install the connector board cables.
Connector board
To remove the connector board, use this procedure and illustration.
ENWW
Component replacement procedures
35
Содержание Chromebook 11a
