HP SureStore DAT
Installing an “e” Model Drive (external)
1-8
Step 2: Connect the SCSI Cable
Caution
To avoid damaging the computer or tape drive, ensure that both are
powered off while you attach the SCSI cable.
1
Perform a normal system shutdown and turn off the computer and any
connected peripherals.
You may need a different cable if your computer’s SCSI connector does not
match the cable supplied with your drive.
• If you have an HP SureStore Tape 5000e model, a 50-pin narrow SCSI
cable is provided.
• If you have a DAT8e, DAT24e or DAT40e model, a 68-pin wide SCSI
cable is provided. This cable has been specified for use with LVD systems
up to Ultra2 speeds.
• If you do not have the appropriate cable for your computer, you will have
to order one from your supplier. (For HP part numbers and descriptions,
see the electronic DAT Media and Orderable Accessories Guide on the
HP SureStore Tape CD-ROM.)
2
Attach one end of the SCSI cable to the computer’s external SCSI
connector. See figure 1.3. Push firmly and secure the cable in place with its
retainers (or screws).
Figure 1.3
Connecting the SCSI cable and power cable
SCSI cable
SCSI
connector
SCSI terminator
Power cable
Dat-ext.bk Page 8 Wednesday, May 26, 1999 9:44 AM
