HP Brocade BladeSystem 4/12, Руководство пользователя

Страница: 228 / 662

196 DCFM Professional User Manual
53-1001773-01
Event policies
8
11. Select the Active check box to activate the duplicated policy.
12. Click OK on the Event Policies dialog box.
Duplicating a security violation policy
To duplicate a security violation policy, complete the following steps.
1. Select Monitor > Event Policies.
The Event Policies dialog box displays.
2. Select the policy you want to duplicate in the Policies table.
3. Click Duplicate.
The Duplicate Event Policy dialog box displays.
4. Enter a name (255 characters maximum) for the policy in the Name field.
Policy names must be unique; however, they are case insensitive.
5. Define the trigger in the IP Address, Node WWN, and Name list.
The trigger is limited to 1024 characters. Multiple values must be separated by a semi-colon.
When multiple values are entered, as long as at least one value matches the IP address, Node
WWN, or Name in the event and all other conditions are met, an action is triggered.
IP addresses can either be in IPv4 or IPv6 format and must be complete.
A Node WWN is accepted with or without the colon.
6. Enter a value (between 2 and 999) in the Count field.
7. Enter a value (between 1 and 999) in the Duration field.
8. Select the duration type (Seconds or Minutes) from the Duration list.
The maximum duration is 30 minutes.
9. Select the check box in the Actions list for each action you want to occur when this policy is
triggered.
For a list of the available actions, refer to “Policy actions” on page 185. To define an action,
refer to “Defining the broadcast message action” on page 189, “Defining the launch script
action” on page 190, “Defining the send e-mail action” on page 191, or “Configuring support
data capture action” on page 192.
10. Click OK on the Add Event Policy dialog box.
11. Select the Active check box to activate the duplicated policy.
12. Click OK on the Event Policies dialog box.