HP Brocade BladeSystem 4/12, Руководство пользователя

Страница: 98 / 662

66 DCFM Professional User Manual
53-1001773-01
Display
3
Restoring data to a new server
If your Management application server fails and you must recover information to a new server,
restore the data (Refer to
“Restoring data” on page 65 for complete instructions).
Display
You can reset the display to the default settings.
Resetting your display
You can reset your system to display the default display settings. Note that returning to current
settings after a reset may require configuring each global fabric or group setting individually. The
following table (
Table 5 ) details the settings that change with reset and the associated default
state.
To reset the Management application to the default display and view settings, complete the
following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Display in the Category list.
3. Click Reset Display.
4. Click Yes on the reset confirmation message.
The display and view settings are immediately reset to the default display settings (as detailed
in the Default display Settings table (
Table 5 )).
5. Click Apply or OK to save your work.
TABLE 5 Default display settings
Settings Default State
Show port Disabled.
Show connected end device Set to Hide All.
Map Layout Set to default for Groups.
Line Types Set to default for Groups.
Port Display Set to Attached Ports only.
Map Flyovers Set to include the following properties:
•
Product Display—Name, Device Type, WWN, IP Address, and Domain ID.
•
Connection Display—Name (port), Address, Node WWN, Port WWN, and Port #.
Product List Set to only display basic property list.
Table Column Order Set to default for open system.