HP Brio 8500 страница 14 Скачать руководство пользователя | Manualshive

Страница: 14 / 82

background image

14

1 About Your Hardware

Your Sound Card

Connecting Audio Devices to the Rear Panel

You can connect external speakers, a microphone, or other audio devices to the rear panel. Do not connect headphones
to the jack on the

CD-ROM

drive, as this will only let you hear output from music CDs. Through the rear panel jack on

your computer you will hear sounds from training presentations,

MIDI

music files, any other audio software, and music

CDs too.

Details of what each jack on the sound card is for are given below.

LINE IN

Connect devices such as a cassette,

DAT

, or Minidisc player for playback and recording.

MICROPHONE

Connect a microphone for voice input.

LINE OUT

Bypass the sound card’s internal amplifier to connect powered speakers, an external amplifier for audio
output, a recording device (tape deck), or stereo headphones.

You can use this jack for headphones with limited power output. You can also use it with amplified
speakers which have a dedicated headphone jack for this purpose.

SPEAKERS

Connect speakers for audio output from the card’s built-in power amplifier. Adjust the volume from within
the software or from the multimedia control panel if this feature is on your computer.

MIDI/GAME

Connect a joystick (for game software) or MIDI

instrument. The MIDI port is disabled by default. You will

have to enable this port if you wish to use it with a MIDI.

Warning

Before connecting any headphones or speakers, always turn the volume down to avoid discomfort from unexpected
noise or static. Listening to loud sounds for prolonged periods of time may permanently damage your hearing. Before
putting on any headphones, place them around your neck and turn the volume down. Then, put on the headphones
and slowly increase the volume by using the Audio Mixer Applet or the enhanced keyboard until you find a
comfortable listening level, where the sound is clear without being too loud. When you can hear comfortably and
clearly, without distortion, leave the volume control in that position.

Warning

The SPEAKERS jack is for a highly amplified output and is therefore not suitable for connecting headphones.

«
...
12
13
14
15
16
...
»

Содержание Brio 8500



















































































Отзывы:

Нет отзывов

Похожие инструкции для Brio 8500

Бренд: IBM Страницы: 230

Бренд: Layher Страницы: 6

Бренд: Acer Страницы: 43

Бренд: Yawarra Страницы: 4

Бренд: EUROCOM Страницы: 271

Бренд: AXIOMTEK Страницы: 65

Бренд: Fujitsu Страницы: 38

Бренд: Fujitsu Страницы: 9

Бренд: Fujitsu Страницы: 10

Esprimo E5 Series

Бренд: Fujitsu Страницы: 73

DESKPOWER N300 Series

Бренд: Fujitsu Страницы: 61

Бренд: Fujitsu Страницы: 56

Бренд: Fujitsu Страницы: 50

ESPRIMO D5 Series

Бренд: Fujitsu Страницы: 83

ESPRIMO E420 E85+

Бренд: Fujitsu Страницы: 8

Бренд: Fujitsu Страницы: 54

Esprimo C series

Бренд: Fujitsu Страницы: 58

Esprimo P2 Series

Бренд: Fujitsu Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды