HP Brio 8500, Онлайн-руководство

Страница: 25 / 82

25
2 About Your BIOS
The HP Setup Program
Boot Device Priority
You can select the order of the devices from which the BIOS attempts to boot the operating system. During the POST , if
the BIOS is unsuccessful at booting from one device, it will try the next one on the
Boot Device Priority
list until an
operating system is found. The default boot device is the floppy disk. To speed up booting, you may wish to set the hard
disk as the default boot device. If you ever need to boot from a floppy though, remember to reset the floppy as the
default boot device.
The Boot Device Priority can be changed through the Boot menu. Use the or arrows to move along the main
menu bar to its location. The item is then highlighted and displays the available boot options.
To select the boot device, use the and arrows, then press the key to move the device up the list, or the
key to move it down the list.
Changing the Boot Device Priority for the current boot:
You can also change the boot order just for the current boot. To do this, press while the logo and the message
Press
<F2> to enter SETUP
are displayed during system startup. This initially displays the POST before displaying the
Boot
Menu. On the
Boot
Menu use the and arrows to select the device from which you want to boot, and then
press . The computer then attempts to boot from the selected drive.
Saving Your Changes and Leaving Setup
When you have made all your changes, you must save them and exit Setup .
1 Press the key to enter the
Exit
menu.
2 Select Exit Saving Changes to save your changes and exit Setup .
The computer will automatically restart. If you set a Password, the computer will display the power-on prompt. Enter the
Password to use the computer.
&$ $# '