HP Brio 8500 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 82

background image

49

3 Upgrading and Adding Accessories

Adding Accessories

Installing an Expansion Card

1

Remove the computer’s cover (refer to

“Removing the Cover” on page 38

).

2

On a table top turn the computer on to its side, with the system board closest to the surface of the table top.

3

Find a free expansion card slot with the correct type of connector (

PCI

or

ISA

). Some cards may have preferred

locations, in which case special installation instructions should be detailed in their manuals.

4

Each slot has a faceplate which is located inside the back of the computer. Remove the faceplate for the slot that you
are installing an expansion card in. If it is tight, loosen the screws on the adjacent slots. Save the retaining screw(s).

5

Handle the card horizontally by its “top” edge with the card’s connector pointing towards the slot’s connector. Do not
bend the card. Carefully slide the card into the slot and firmly press it into place. Ensure that the card’s connector
engages completely with the slot’s connector and does not touch components on other cards.

6

Secure the card with the retaining screw. If you loosened the screws on adjacent faceplates, remember to tighten them.

7

Install any other accessories before returning the computer to the upright position, replacing the cover and
reconnecting the power cords and any telecommunications cables. Turn on the display, and then turn on the computer.

8

If you have just installed a Plug and Play expansion card, Windows is able to recognize and configure the card
automatically. The New Hardware Found dialog box is displayed while Windows loads the necessary driver(s).

Caution

Static electricity can damage electronic components. Turn off all equipment. Don’t let your clothes touch the
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.

Note

Some models may be provided with a faceplate that has to be removed with a screwdriver. To do this, insert a
flathead screwdriver into the slot on the faceplate, then push forward until it snaps off.

«
...
47
48
49
50
51
...
»

Содержание Brio 8500



















































































Отзывы:

Нет отзывов

Похожие инструкции для Brio 8500

Бренд: Acer Страницы: 106

Бренд: Acer Страницы: 83

Бренд: Acer Страницы: 81

Бренд: Acer Страницы: 89

T230H - Bmidh Wide Touch Screen Display

Бренд: Acer Страницы: 12

Бренд: Acer Страницы: 100

ToughBook CF-72 Series

Бренд: Panasonic Страницы: 8

Toughbook CF-H2

Бренд: Panasonic Страницы: 36

Toughbook CF-H1CSLFZ6M

Бренд: Panasonic Страницы: 106

Kontron KBox E-410-APL

Бренд: S&T Страницы: 78

Бренд: UUGear Страницы: 25

All-in-One Touch PC

Бренд: Vizio Страницы: 40

Rosemount TankRadar SCC 5320

Бренд: Emerson Страницы: 4

Бренд: Emerson Страницы: 108

Бренд: KME Страницы: 2

SIMATIC IPC847C

Бренд: Siemens Страницы: 46

SIMATIC PC RI25

Бренд: Siemens Страницы: 64

SIMATIC Panel PC 677

Бренд: Siemens Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды