Installation 46
•
PROBE_RETRY_COUNT
o
Syntax: probe_retry_count=nnn
o
Description: Changes probes retry count
•
PROBE_SEND_INTERVAL
o
Syntax: probe_send_interval=nnn
o
Description: Changes probes send interval, nnn counts 1/18 sec
•
PROBE_SET_DEFAULT
o
Syntax: probe_set_default
o
Description: Restores probes settings to factory settings
•
PROBES
o
Syntax: probes=[on | off]
o
Description: Enables/disables probes
•
PROBES
o
Syntax: probes=[BROADCAST|MULTICAST]
o
Description: Changes probes addressing
•
RECOMMIT
o
Syntax: recommit [team=nnn]
o
Description: Resets a certain mode. Use after hot binding to base drivers with Team=nnn
•
REMOVETEAM
o
Syntax: removeteam [team=nnn]
o
Description: Removes a team. Use after hot binding to base drivers with Team=nnn
•
REMOVEVLANID
o
Syntax: RemoveVlanID=nnn
o
Description: Removes the selected VLAN
•
RESET
o
Syntax: RESET LBN=nnn
o
Description: Supported only after Commit command
•
SECONDARY
o
Syntax: primary | secondary
o
Description: Identifies the secondary adapter. Supported only in BIND command.
•
SMPMODE
o
Syntax: SMPMODE=[SMP | NONSMP]
o
Description: Enables/disables SMP aware
•
STATUS
o
Syntax: status [team=nnn]
o
Description: Prints CPQANS status
•
TEAM
o
Syntax: team=nnnn
