Diagnostics 171
1.
If you have not already done so, download and extract the HP SoftPaq file and then run
MAKEDISK.BAT
to create a driver disk.
2.
Boot to DOS or the EFI shell.
3.
From the DOS prompt navigate to the \APPS\DIAGS\MFDIAG directory.
4.
Type
XDIAG
and press the
Enter
key. The diagnostic tests run automatically.
Command line options
The following are the available options in xdiag. They are case sensitive.
Usage: xdiag [options]
•
-t <grps/tests>
Disables certain tests/groups (for example: a1c2)
•
-T <grps/tests>
Enables certain tests/groups (for example: a1c2)
•
-c <card#>
Selects device number on which tests will be running
•
-I <iteration#>
Specifies how many iterations tests need to run
•
-wol <1|0>
Enables (1) or disables (0) magic pkt wol
•
-pxe <1|0>
Enables (1) or disables (0) pxe
•
-asf <1|0>
Enables (1) or disables (0) asf
•
-cof
Allow tests to continue tests on failure
•
-ver
Displays information on devices and xdiag version
•
-log <logfile>
Logs the tests execution into the specified file
•
-help
Prints out the screen
