manualshive.com logo in svg

HP BladeSystem c3000, Руководство по установке и настройке, Страница: 57 / 94

Поделиться
Скачать
HP BladeSystem c3000 Скачать руководство пользователя страница 57

 

Using the HP BladeSystem Insight Display  57 

Using the HP BladeSystem Insight Display 

Insight Display overview 

The Insight Display enables the rack technician to configure the enclosure initially. It also provides 
information about the health and operation of the enclosure. See the 

HP BladeSystem Onboard 

Administrator User Guide

 for additional information. 

The Insight Display background color varies with the condition of the enclosure health: 

•

 

Blue—The Insight Display background illuminates blue when the enclosure UID is active. The enclosure 
UID is automatically turned on when the enclosure is powered up for the first time and can be turned on 

by selecting 

Turn Enclosure UID On

 from the Main Menu or by pressing the enclosure UID button on the 

rear of the enclosure. 
When the enclosure UID is on, the Insight Display flashes after 2 minutes of inactivity. Pressing any 
button on the Insight Display stops the flashing and reactivates the screen. 

•

 

Green—The Insight Display background illuminates green when no error or alert conditions exist and 
the enclosure is operating normally. After 2 minutes of inactivity, the Insight Display light turns off. 

Pressing any button on the Insight Display reactivates the screen. 

•

 

Amber—The Insight Display background illuminates amber when the Onboard Administrator detects 
an error or alert condition. Depending on the error, the component is displayed in red or yellow on the 

Health Summary screen. 
After 2 minutes of inactivity, the Insight Display background flashes amber, indicating an error or alert 
condition exists. If the enclosure UID is on and an error or alert condition exists, the Insight Display 

illuminates blue because the enclosure UID takes priority over the alert. Pressing any button on the 
Insight Display reactivates the screen. 

•

 

Dark (no power)—The Insight Display has a 2-minute inactivity period. If no action is taken and no alert 
condition exists, the enclosure UID is off, or the chat mode has not been activated, the screen light turns 

off after 2 minutes. Pressing any button on the Insight Display reactivates the screen.   

The Enclosure Health icon is located on the bottom left corner of every screen, indicating the enclosure health. 

To access the Health Summary screen from any Insight Display screen, navigate the cursor to the Enclosure 
Health icon and press 

OK

. 

For information on driver and firmware updates, see the HP website (

http://www.hp.com/go/blades/

). 

 

Installing and configuring the Insight Display 

To identify the enclosure, the rear enclosure UID light and the background of the Insight Display are 
illuminated blue when the enclosure is powered on initially. When the enclosure is powered up for the first 

time, the Insight Display launches an installation wizard to guide you through the configuration process. At 

the beginning of the installation, the wizard automatically powers on the enclosure UID. After the installation 

is complete, the wizard powers off the enclosure. After configuring the enclosure, the Insight Display verifies 
that there are no installation or configuration errors. If errors are present, the Insight Display guides you 

through the process of correcting the errors. 

Содержание BladeSystem c3000































































































Отзывы:

Нет отзывов