HP BladeSystem c3000 Скачать руководство пользователя страница 23

Страница: 23 / 94

Installing components 23

Install the enclosure into the rack ("

Installing the enclosure in a rack

" on page

Measuring with the rack template

The rack template ships with the rack rail kit and provides detailed instructions on where to position the

enclosure rack rails and where to install the four cage or clip nuts. Each enclosure kit includes the rack rails

recommended for that enclosure.

NOTE:

Four cage nuts and four clip nuts are included with the enclosure. Cage nuts should be

used in racks with square holes. Clip nuts should be used in racks with round holes.

When installing multiple enclosures, install the rack rails and cage or clip nuts for one enclosure, and then

install the enclosure. Repeat for each additional enclosure.

Installing the rack rails

The rack rails are marked for easy identification. The left rack rail is marked "L" and the right rack rail is

marked "R."
To install the rack rails:

Begin with the left rack rail. Align the end of the rail with the rear rack column.

Slide the rack rail closed until the end of the rail is locked in place, wrapping behind the rear rack

column.

Содержание BladeSystem c3000































































































Результаты поиска

Содержание BladeSystem c3000

Отзывы:

HP BladeSystem c3000, Руководство по установке и настройке, Страница: 23 / 94

Результаты поиска

Содержание BladeSystem c3000

Отзывы: