34
Upgrading and Servicing Guide
Adding or replacing a hard disk drive
1
If necessary, remove the existing drive. See “Removing the hard disk drive” on
page 33.
2
Tip the left side of the drive into the drawer, and insert the pins (
B
) into the drive. If
necessary, adjust the position of the pins on the left side (
A
) to match the drive.
3
Pull out the flexible right side of the drawer (
C
), and lower the drive into the drawer,
inserting the pins (
E
) on the right side into the drive (
D
). If necessary, adjust the
position of the pins on the right side to match the drive.
WARNING: The lowest of the five hard disk drive drawer slots contains the
operating system. If you install the primary hard disk drive in another slot, or
if you install a data disk in the lowest slot, the computer may not operate
properly.
A
B
C
D
D
E
E
Содержание blackbird 002
Страница 1: ...Upgrading and Servicing Guide ...
Страница 4: ...iv Table of Contents ...
Страница 23: ...Upgrading and Servicing Guide 19 3 Insert three screws P to secure the panel P ...
Страница 54: ...50 Upgrading and Servicing Guide 4 Locate the SATA backplane B on the right side of the chassis B ...