manualshive.com logo in svg

HP B132L+, Руководство пользователя, Страница: 82 / 256

Поделиться
Скачать
HP B132L+ Скачать руководство пользователя страница 82

68

Using Your 3.5-Inch Floppy Disk Drive

Operating the Floppy Drive

Using Device Files

Device files are special files that tell your system which system hardware
pathway to use when communicating with a specific device and what kind of
device it is.

To determine what device files are available for use with your floppy drive,
use the following procedure:

1

In a terminal window, enter the following command:

sam

RETURN

2

The System Administration Manager window opens. Double-click on
Disks and File Systems->.

3

The Disks and File Systems window opens.

4

In the list of drives, click on the floppy drive listing to select it.

5

From the Actions menu, click on View More Information

A window opens with a list of information for the floppy drive, including the
device files.

Содержание B132L+

































































































































































































































































Отзывы:

Нет отзывов