HP A6602, Руководство по установке

Страница: 79 / 99

Select 3 from the file control sub-menu. The system displays the following information:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
=========================================================================
|NO. Size(B) Time Type Name |
|1 734 Dec/17/2007 11:47:20 N/A cfa0:/startup.cfg |
|2 760 Dec/17/2007 18:49:50 N/A cfa0:/startup_bak2.cfg |
|3 810 Dec/17/2007 18:49:26 M cfa0:/startup_bak1.cfg |
|4 850 Dec/17/2007 18:50:08 N/A cfa0:/startup_bak3.cfg |
|0 Exit |
=========================================================================
Enter file No:
Select a file number, which is 1 in this example. The following information appears:
Modify the file attribute:
=========================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
=========================================================================
Enter your choice(0-4):
You can set the file attribute to M (main) or B (backup), or cancel the setting by selecting a
choice from
1 to 4 .
In this example, 1 is selected and the system changes the file startup.cfg from type N/A to type
M.
Set the file attribute success!
Now, the attribute of the file startup_bak1.cfg has automatically changed from M to N/A.
After selecting 3 from the file control sub-menu, if you select 0 to exit the menu, the system
enters the default mode for the main and backup configuration files, namely the files
cfa0:/main.cfg and/or cfa0:/backup.cfg, if any, are automatically assigned the M and/or B
attributes respectively.
Setting configuration file attributes at the CLI
You can use the startup saved-configuration cfgfile [ backup | main ] command to define the
configuration file to be used for the next boot and its attribute. In this command, use cfgfile
argument to specify the configuration file name.
Note that:

You can use the startup saved-configuration cfgfile main command to change the attribute of
an N/A-type configuration file to M.

You can use the startup saved-configuration cfgfile backup command to change the
attribute of an N/A-type configuration file to B.

You can use the startup saved-configuration cfgfile backup command to change the
attribute of an M-type configuration file to M + B.

You can use the startup saved-configuration cfgfile main command to change the attribute of
a B-type configuration file to M + B.

If you use neither main nor backup in your command, you assign the M attribute to the
specified configuration file.

If you assign the M attribute to a configuration file, the attribute of the existing main
configuration file, if any, is automatically erased, because there can be only one main
configuration file in the system at a time.