HP A6602, Руководство по установке

Страница: 7 / 99

Dimensions and Weight
Table 1-2 Dimensions and weight
Item Specification
Dimensions without feet and rack-mounting ears (H ×
W × D)
44 × 442 × 460 mm (1.73 × 17.40 × 18.11 in.)
Weight 7.5 kg (16.53 lb)
Fixed Interfaces and Slots
Table 1-3 Fixed interfaces and slots
Item Specification
Console port 1 (9600 bps to 115200 bps, 9600 bps by default)
AUX port 1 (9600 bps to 115200 bps, 9600 bps by default)
USB interfaces 2
USB 0: Type A connector, operating in the host mode
USB 1: Type B connector, operating in the device mode
Combo interfaces
Four electrical
Ethernet interfaces:
GE 0 to GE 3
10 Mbps, half duplex/full duplex
100 Mbps, half duplex/full duplex
1000 Mbps, full duplex
Four optical Ethernet
interfaces: SFP 0 to
SFP 3
1000 Mbps, full duplex
CF card slot 1
The optional CF cards supported by the A6602 are available in
three sizes:
256 MB
512 MB
1 GB
Interface module
slots
2
HIM/MIM intermixing is supported.
Two HIMs or two MIMs can be inserted at the same time.

An electrical Ethernet interface and its corresponding optical Ethernet interface form a Combo
interface.

The electrical Ethernet interface and optical Ethernet interface of a Combo interface cannot
work simultaneously.

For a Combo interface, the default operating interface is the optical Ethernet interface. You can
switch between the optical Ethernet interface and the electrical Ethernet interface by using the
combo enable { copper | fiber } command in interface view.

For details about the combo enable { copper | fiber } command, refer to HP SR6600 Routers
User Manual .