HP 9840, Руководство по эксплуатации

Страница: 90 / 122

9840 Menu System
9840 Tape Drive Operations Guide— 429596-002
B -10
SCSI Configuration Menu
DSE Mode Sub-Menu In Configuration Main Menu
Selections: “Full DSE Y” (Full Data Security Erase Yes)
“Full DSE N” (Full Data Security Erase No)
Defaults to last saved selection.
Full DSE Yes allows full Data Security Erase of all tracks; it consumes much time.
Full DSE No writes information on the media that notifies the drive that no valid data
exists beyond this point; it is quicker.
1. If applicable, press Menu to access.
2. Press Select until the desired option displays.
3. Press Menu to exit to the next sub-menu.
SCSI ID Sub-Menu In Configuration Main Menu
Selections: “SCSI ID x”
Defaults to the last saved selection.
Establishes SCSI ID of drive. Provided address range is 0-7 for a narrow channel an 0-
F for a wide channel.
1. If applicable, press Menu to access.
2. Press Select to increment counter to ID value.
3. Press Menu to exit to the next sub-menu.
SCSI Target Negotiation Mode Sub-Menu In Configuration
Main Menu
Selections: “Targ Neg Y” (Target Negotiation Yes)
“Targ Neg N” (Target Negotiation No)
Defaults to the last saved selection.
When Yes is chosen, it allows drive control unit to initiate negotiations with host and to
clarify SCSI transmission speed, in case the host had not done so.
1. If applicable, press Menu to access.
2. Press Select until the desired option displays.
3. Press Menu to exit to the next sub-menu.