HP 9840, Руководство по эксплуатации

Страница: 68 / 122

L700 Tape Library
9840 Tape Drive Operations Guide— 429596-002
4- 24
Powering Off the Library
11. The user will be prompted to confirm that the library is wanted to be in
Maintenance Mode (offline) before beginning the test (ARE YOU SURE?). Confirm
this by pressing the
SELECT button. The MENU button may be pressed to abort.
12. Wait until the test is complete; the screen will display TEST COMPLETE.
13. Press the RESET button to reset the library.
Powering Off the Library
To power off the library:
1. Enter the command at the server console to remove the tape library and drives
from online status.
2. Press down on the switch or switches (breakers) behind the right front door of the
tape library.
Operation in Manual Mode
The following pages describe operations that can be performed when the tape library is
in the manual mode. Manual mode occurs when the tape library is not online or loses
power.
•
When the library is offline, you might have to:
•
Open the front door
•
Move the robot
•
Locate a cartridge in the storage cells
•
Remove a cartridge from the hand
•
Mount a cartridge in a drive
•
Dismount a cartridge from a drive
Before starting any of these tasks, precautions must be taken against electrostatic
discharge (ESD).
After the library door has been opened:
1. Touch a gray, unpainted metal surface, such as the library frame just inside the
front door.
2. Keep all body movement to a minimum as the tape drives and library components
are being touched.
Caution. Components are Sensitive to Static Electricity : Even a small electrostatic discharge
could damage an electrical component inside the library. A damaged component might not fail
immediately, but over time, it will become worse, possibly causing an “intermittent” problem. Be
sure to touch gray, unpainted metal before reaching inside the library.