HP 9840, Руководство по эксплуатации

Страница: 101 / 122

9840 Menu System
9840 Tape Drive Operations Guide— 429596-002
B -21
Example of Menu Selection: SCSI Bus Speed Mode
c. To return to the menu system, press Menu .
1. Press Select to toggle drive online/offline status.
2. Press Menu repeatedly until “Exit Menu?” is displayed, then press Select
to exit.
2. To exit menu mode altogether without changing drive online/offline status, press
Select .
3. If the user exited, observe the display. When the user exits Menu mode, a drive
status indication such as these is shown:
•
A Ready message (indicating that the drive is online and loaded)
•
An asterisk (indicating that the drive is online but not loaded)
•
An Offline message alternating with an asterisk (indicating the drive is offline)
Example of Menu Selection: SCSI Bus Speed Mode
1. Enter the Menu system and take the drive offline.
2. Repeatedly press Menu until the Configuration Main Menu is reached. “Change
CFG?” will be displayed.
3. Press Select to enter the Configuration Main Menu.
4. Repeatedly press the Menu switch until the display shows “SCSI Ultra,” “SCSI
Fast,” or “SCSI Slow.” What shows is the current selection.
5. To change the current selection, press the Select switch until the desired display is
reached. What shows now is the new unsaved selection.
6. Press Menu as necessary to reach the configuration save menu: “Save CFG?” will
be displayed.
7. Choose from the following as applicable:
a. To save the changes and exit:
Press Select to save: “Saving CFG” is displayed for about two seconds.
Press Select again to exit to the next main menu.
b. To abort the changes, keep the original configuration, and exit:
Press Menu to not save.
Press Select to exit to the next main menu.
c. To not save and repeat configuration editing:
Press Menu to not save.
Press Menu again to repeat configuration editing (return to Step 2).