HP 8562E, Руководство по обслуживанию

Страница: 183 / 482

5
Parts
This chapter contains information on ordering all replaceable parts and assemblies. Locate the
instrument parts in the following figures and tables:
Table 5-l. Reference Designations, Abbreviations and Multipliers
Table 5-2. Manufacturers Code List
Table 5-3. Replaceable Parts
Figure 5-l. Parts Identification, Assembly Mounting
Figure 5-2. Parts Identification, Cover Assembly
Figure 5-3. Parts Identification, Main Chassis
Figure 5-4. Parts Identification, RF Section
Figure 5-5. Parts Identification, Front Frame
Figure 5-6. Parts Identification, Rear Frame
Ordering Information
To order a part or assembly, quote the Hewlett-Packard part number (with check digit),
indicate the quantity required, and address the order to the nearest Hewlett-Packard office.
The check digit will ensure accurate and timely processing of your order.
To order a part that is not listed in the replaceable parts table, include the instrument model
number, the description and function of the part, and the number of parts required. Address
the order to the nearest Hewlett-Packard office.
Within the USA, Hewlett-Packard can supply parts through a direct mail-order system.
Advantages of using the system are
as
follows:
n
Direct ordering and shipment from the HP Support Materials Organization in Roseville,
California.
n
No maximum or minimum on any mail order. (There is a minimum order amount for parts
ordered through a local HP office when the orders require billing and invoicing.)
n
Prepaid transportation. (There is a small handling charge for each order.)
No invoices.
To provide these advantages, a check or money order must accompany each order. Mail-order
forms and specific ordering information is available through your local Hewlett-Packard Sales
and Service office. See Table l-5.
Replaceable Parts 5-l