5-8
www.hp.com
Technical Reference Guide
Input/Output Interfaces
5.5.2 Pointing Device Interface Operation
The pointing device (typically a mouse) connects to a 6-pin DIN-type connector that is identical
to the keyboard connector both physically and electrically. The operation of the interface (clock
and data signal control) is the same as for the keyboard. The pointing device interface uses the
IRQ12 interrupt.
5.5.3 Keyboard/Pointing Device Interface Connector
The legacy-light model provides separate PS/2 connectors for the keyboard and pointing device.
Both connectors are identical both physically and electrically. Figure 5-6 and Table 5-4 show the
connector and pinout of the keyboard/pointing device interface connectors.
Figure 5-6. PS/2 Keyboard or Pointing Device Interface Connector (as viewed from rear of chassis)
Table 5-4.
Keyboard/Pointing Device Connector Pinout
Pin
Signal
Description
Pin Signal
Description
1
DATA
Data
4
+ 5 VDC
Power
2
NC
Not Connected
5
CLK
Clock
3
GND
Ground
6
NC
Not Connected
Содержание 8100 - Elite Convertible Minitower PC
Страница 16: ...1 10 www hp com Technical Reference Guide Introduction ...
Страница 28: ...2 12 www hp com Technical Reference Guide System Overview ...
Страница 74: ...6 8 www hp com Technical Reference Guide Integrated Graphics Subsystem ...
Страница 110: ...A 20 www hp com Technical Reference Guide Error Messages and Codes ...