4-8
www.hp.com
Technical Reference Guide
System Support
NOTES:
[1] CMT only
The PCI interrupts can be configured by PCI Configuration Registers 60h..63h to share the
standard ISA interrupts (IRQn).
✎
The APIC mode is supported by Windows NT, Windows 2000, and Windows XP, Windows
Vista, and Windows 7 operating systems. Systems running the Windows 95 or 98 operating
system will need to run in 8259 mode.
4.3.2 Direct Memory Access
Direct Memory Access (DMA) is a method by which a device accesses system memory without
involving the microprocessor. Although the DMA method has been traditionally used to transfer
blocks of data to or from an ISA I/O device, PCI devices may also use DMA operation as well.
The DMA method reduces the amount of CPU interactions with memory, freeing the CPU for
other processing tasks. For detailed information regarding DMA operation, refer to the data
manual for the Intel 82801 PCH I/O Controller Hub.
Table 4-5.
PCI Interrupt Distribution
System Interrupts
System Board
Connector
PIRQ
A
PIRQ
B
PIRQ
C
PIRQ
D
PIRQ
E
PIRQ
F
PIRQ
G
PIRQ
H
PCI slot 1 (J20)
A
B
C
D
PCI slot 2 (J21) [1]
D
A
B
C
PCI slot 3 (J22) [1]
C
D
A
B
Содержание 8100 - Elite Convertible Minitower PC
Страница 16: ...1 10 www hp com Technical Reference Guide Introduction ...
Страница 28: ...2 12 www hp com Technical Reference Guide System Overview ...
Страница 74: ...6 8 www hp com Technical Reference Guide Integrated Graphics Subsystem ...
Страница 110: ...A 20 www hp com Technical Reference Guide Error Messages and Codes ...