System Board
CAUTION:
Be very careful when removing or replacing the system board to prevent damaging it.
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 30
).
2.
Remove the computer access panel (
Computer Access Panel on page 38
).
3.
Remove the front bezel (
Front Bezel on page 39
).
4.
Remove the optical drive (
Removing the Existing Optical Drive on page 46
).
5.
Remove the memory modules (
Installing Additional Memory on page 41
).
6.
Remove the front fan (
Front Fan on page 55
).
7.
Remove the hard drive (
Hard Drive on page 49
).
8.
Remove the heat sink (
Heat sink on page 58
).
9.
Remove the hard drive cage (
Hard Drive Cage on page 53
).
10.
Remove the front I/O panel cage:
a.
Remove the screw from the right side of the cage that secures the I/O panel cage to the
front of the chassis
(1)
.
b.
Press the tab on right side of the cage
(2)
, and then swing the right side of the cage away
from the chassis to remove it
(3)
.
NOTE:
If the cage sticks and will not come loose, press down on the top of the panel near
the tab while pressing the tab.
Figure 6-35
Removing the I/O panel cage
11.
Remove the heat sink (
Heat sink on page 58
).
12.
Disconnect all cables connected to the system board, noting their location for reinstallation.
System Board
61
Содержание 8000f - Elite Ultra-slim Desktop PC
Страница 1: ...Maintenance and Service Guide HP Compaq 8000f Elite Business PC Ultra slim Desktop ...
Страница 4: ...iv About This Book ...
Страница 10: ...x ...
