HP 8000f - Elite Ultra-slim Desktop PC Скачать руководство пользователя страница 98

Страница: 98 / 166

The

Test Components

section provides a description of each test, as well as the parameters that

may be adjusted when running in Custom test mode.

The

Defect codes

section contains information on the numerical error code that may appear in the

Errors tab.

The

Memory test tab

section provides information on the

HP Memory Test

application that may be

launched from the boot menu.

The

HP Support

section provides information on obtaining technical support from HP.

Saving and Printing Information in HP Vision Diagnostics

You can save the information displayed in the HP Vision Diagnostics

Survey

History

and

Errors

tabs to a USB flash drive. You can not save to the hard drive. The system will automatically create an
html file that has the same appearance as the information displayed on the screen.

Insert a USB flash drive if running HP Vision Diagnostics from CD.

Click

Save

in the bottom on any of the

Survey

History

Errors

tabs. All three log files will be

saved regardless of from which tab the Save button was clicked.

Select the drive onto which you will save the log files and click the

Save

button. Three html files

will be saved to the inserted USB flash drive.

NOTE:

Do not remove the USB flash drive until you see a message indicating that the html

files have been written to the media.

Print the desired information from the storage device used to save it.

NOTE:

To exit HP Vision Diagnostics, click the

Exit Diagnostics

button at the bottom of the screen.

Be sure to remove the USB flash drive or CD from the optical drive.

Downloading the Latest Version of HP Vision Diagnostics

Go to

http://www.hp.com

Click the

Software & Drivers

link.

Select

Download drivers and software (and firmware)

Enter your product name in the text box and press the

Enter

key.

Select your specific computer model.

Select your OS.

Click the

Diagnostic

link.

Click the

Hewlett-Packard Vision Diagnostics

link.

Click the

Download

button.

NOTE:

The download includes instructions on how to create the bootable CD or the bootable USB

flash drive.

Appendix D Computer Diagnostic Features

Содержание 8000f - Elite Ultra-slim Desktop PC







































































































































































Результаты поиска

Содержание 8000f - Elite Ultra-slim Desktop PC

Отзывы:

Похожие инструкции для 8000f - Elite Ultra-slim Desktop PC

Бренды по названию

Популярные бренды

HP 8000f - Elite Ultra-slim Desktop PC, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание 8000f - Elite Ultra-slim Desktop PC

Отзывы:

Похожие инструкции для 8000f - Elite Ultra-slim Desktop PC

Бренды по названию

Популярные бренды