HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure, Руководство пользователя

Страница: 178 / 462

In some cases, subject to your security policies, consider changing the security credentials of the replication
manager server (one change) to match those saved with the job events (potentially many changes).
Running jobs
Run a job. Whenever you run a job, HP recommends that you validate it. Validation helps prevent job
failures by checking resource availability before the job begins executing commands. See jobs
validation .
Considerations
• You can use the GUI or CLUI.
• Jobs often interact with resources in the SAN. If those resources change, the jobs may not run
properly.
• Jobs that interact with the same resources can impact each other. One job can change resources
in such a manner that another job is impacted.
Procedures
Running a job from the GUI
1. In the navigation pane, select Jobs to display the Jobs window in the content pane.
2. Click the List tab.
3. Select the job you want to run.
4. Select Actions > Run . The Con fi rm Job Run window opens.
5. Select an execution mode:
• Normal - Validates the job and then runs it.
• Validate Only - Validates the job but does not run it.
• Skip Validation - Runs the job without
fi rst validating it.
6. Click OK to run the job. The Monitor Job window opens, indicating the job execution mode
Running a job from the CLUI
1.
Open a CLUI window.
2.
Issue a Set Job command . Include the job name , mode switch and run switch . The mode
should be normal or skip validation .
Selecting values for arguments
Select an argument value. The argument editor allows you to select one or more values for job command
arguments. (See arguments and argument lists .) Depending on the command, you can select from
several types of resources. For example, the SetListVariable command allows you to select from storage
volumes and storage containers.
Considerations
• You can use only use the GUI.
Procedure
The following is the general procedure for selecting arguments in the Editing Task window.
1. Select an argument and click the expand-argument button [...]. The Argument Editor window
opens.
178
Jobs