HP 4155A, Руководство пользователя по задачам

Страница: 176 / 279

Analyzing Measurement Results
Manual Analysis
T o Draw Line through Specied P oint with Specied
Gradient
1. Select
NNNNNNNNNNNNNN
LINE primary softkey .
2.
Set
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LINE SELECT softkey to 1 or 2 . Selecting this softkey toggles the
setting.
3.
Set
NNNNNNNNNNNNNN
LINE secondary softkey to ON . A line and two cursors are displayed.
Selecting
NNNNNNNNNNNNNN
LINE secondary softkey toggles as follows:
OFF ! ON ! OFF
4. Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
GRAD MODE secondary softkey if it is not highlighted. Softkey
becomes highlighted. One cursor disappears (if there are two cursors
in the plotting area before this step). Selecting
N
NNNNNNNNNNNNNNNNNNNNNNNNNNNN
GRAD MODE secondary
softkey toggles between highlighted and not highlighted.
5. Move the cursor to desired location by using arrow keys of the
MARKER/CURSOR key group .
6.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
GRAD VALUE secondary softkey , then enter gradient value . The line
goes through the cursor with specied gradient.
When lines are displayed and when ON is set in the LINE P ARAMETER eld
on the DISPLA Y : DISPLA Y SETUP page , the X and Y intercepts and gradients
of selected line are also displayed in the plotting area.
T o turn o the line intercept and gradient display.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DISPLAY SETUP primary softkey , then set
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LINE PRMTRS secondary
softkey to OFF .
T o turn o the data variable display area.
Use the following procedure:
1.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DISPLAY SETUP primary softkey .
2.
Set
NNNNNNNNNNNNNNNNNNNNNNNNNN
DATA VAR secondary softkey to OFF .
T o move the selected cursor to the selected marker position.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CURSOR TO MARKER secondary softkey .
4-15