HP 4155A, Руководство пользователя по задачам

Страница: 150 / 279

Making a Measurement
Stress Force
T o Set up Stress Condition/Timing
1. Press 4
Stress
5 key in the P A GE CONTROL key group .
2.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STRESS SETUP primary softkey .
3. In the MODE eld of the STRESS MODE area, select:
NNNNNNNNNNNNNNNNNNNNNNNNNN
DURATION secondary softkey to specify how long to force stress .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
PULSE COUNT secondary softkey to specify how many pulses to output
for force stress (for ac stress only).
4. In the DURA TION or PULSE COUNT eld, enter the duration or pulse
count. Y ou can select
NNNNNNNNNNNNNNNNNNNNNNNNNN
FREE RUN secondary softkey to output stress
continuously .
5.
In the STRESS
NNNNNNNNNNN
Status eld, select:
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CONT AT ANY secondary softkey to continue forcing the stress even if
an abnormal status occurs .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STOP AT ANY ABNORM secondary softkey to stop forcing the stress
when any abnormal status occurs .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STOP AT COMPLIANCE secondary softkey to stop forcing the stress only
when SMU reaches its compliance setting.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STOP AT ANY ABNORM and
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STOP AT COMPLIANCE secondary softkeys
are displayed only when specied duration is more than 10 s . If you set
pulse count mode , these secondary softkeys are displayed only when
pulse period 2 pulse count is more than 10 s .
Stress stop function is not eective until stress has been forced for 10 s .
In the duration mode , you set time (in seconds) for stress forcing. In the
pulse count mode , you set an integer to specify how many pulses to output
for stress forcing.
3-57