HP 3100 v2 Series Скачать руководство пользователя страница 73

Страница: 73 / 239

Table 14 Command output

Field Description

Bridge-Aggregation1 current state

The Layer 2 interface status:

•

DOWN ( Administratively )

—The interface is administratively

shut down with the

shutdown

command.

•

DOWN

—The interface is administratively up but physically down

(possibly because no physical link is present or the link is faulty).

•

—The Ethernet interface is both administratively and

physically up.

Unknown-speed mode,
unknown-duplex mode

The interface speed and duplex mode are unknown.

PVID

Port default VLAN ID (PVID).

Last clearing of counters

Time when the

reset counters interface

command was last used to

clear the interface statistics.

Never

indicates the

reset counters interface

command has never

been used on the interface since the device’s startup.

Last 300 seconds input/output

Average input/output rate over the last 300 seconds.

Input/Output (total)

Statistics of all packets received/sent on the interface.

Input/Output (normal)

Statistics of all normal packets received/sent on the interface.

The brief information of
interface(s) under bridge mode

Brief information about Layer 2 interfaces.

Link: ADM - administratively
down; Stby - standby

Link status:

•

ADM

—The interface has been administratively shut down. To

recover its physical layer state, perform the

undo shutdown

command.

•

Stby

—The interface is operating as a backup interface.

Speed or Duplex: (a)/A - auto; H -
half; F - full

If the speed of an interface is automatically negotiated, its speed
attribute includes the auto negotiation flag, letter

in parentheses.

If the duplex mode of an interface is automatically negotiated, its
duplex mode attribute includes the auto negotiation flag, letter

parentheses or a capital

. Letter

indicates the half duplex mode,

and letter

indicates the full duplex mode.

Type: A - access; T - trunk; H -
hybrid

Link type options for Ethernet interfaces.

Interface

Abbreviated interface name.

Link

Physical link state of the interface.

Speed

Interface speed, in bps.

display lacp system-id

Syntax

display lacp system-id

[

{

begin

exclude

include

}

regular-expression

]

View

Any view

Default level

1: Monitor level

Содержание 3100 v2 Series
















































































































































































































































Результаты поиска

Содержание 3100 v2 Series

Отзывы:

Бренды по названию

Популярные бренды

HP 3100 v2 Series, Справочник по командам

Результаты поиска

Содержание 3100 v2 Series

Отзывы:

Бренды по названию

Популярные бренды