manualshive.com logo in svg

HP 2133, Справочное руководство

Поделиться
Скачать
HP 2133 Скачать руководство пользователя страница 92

Troubleshooting

Reference Guide

6–15

If the Notebook Keeps Beeping

The notebook beeps repeatedly or displays a warning when 
battery power is low. Save your work, shut down Windows 
immediately, and insert a charged battery pack or plug in the 
AC adapter.

If the Battery Pack Does Not Charge

■

Make sure the AC adapter is fully plugged into the 
power source and the notebook, and that the light on 
the adapter is on.

■

If you are using a power strip, remove the AC adapter from 
the power strip and plug it directly into a wall outlet.

■

Make sure the battery pack is fully installed and locked in 
place.

■

Make sure you are using only the AC adapter included with 
your notebook (or other approved adapter that meets the 
power requirements of the notebook). Do 

not

 use a 60-watt, 

3.16-amp adapter.

■

Move the notebook away from any nearby heat source. 
Unplug the AC adapter and allow the battery pack to cool 
down. If the battery pack gets too hot, it will not charge 
properly.

■

If available, try another battery pack and AC adapter.

If the Notebook Has a Short Operating Time

■

Conserve power using any of the suggestions listed in the 

“Battery Packs and Power Management”

 chapter in this 

guide.

■

If you are running an application that has an automatic save 
feature (such as Microsoft Word), disable this feature or 
increase the specified save time to reduce hard disk access.

■

If the operating time has gradually become shorter and the 
battery pack is more than a year or two old, you may need to 
replace the battery pack.

319954-001.book  Page 15  Thursday, February 3, 2005  3:03 PM

Содержание 2133






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды